With the All-Bend®
any angle is possible!

Finally, a pipe elbow with a selectable angle.  Whether you need a 1/4, 1/8, 1/16 bend or any bend in between you'll always have the right one for the job.

All-Bend® is an easy-to-use two-piece elbow that can be cut and assembled to virtually any angle.   This unique ability provides installers with unmatched flexibility and convenience while greatly simplifying the fitting of custom joints.

Each All-Bend® package comes complete with a two-piece selectable angle elbow, angle measuring templates and installation instructions.  All-Bend® units are currently offered in white rigid PVC and black ABS for 1 1/2", 2", 3" and 4" pipe.

The All-Bend® is manufactured to the following standards:

ASTM D2665 (PVC Plastic Drain, Waste and Vent Pipe and Fittings)

ASTM D2466 (PVC Plastic Pipe Fittings, Sch 40 and potable water)

ASTM D2661 and CSA181.1 (ABS Plastic Drain, Waste and Vent Pipe and Fittings)

 

 

All-Bend® is a registered trademark of Image Components, Inc. © 2013 Image Components, Inc. Philadelphia, PA.

Beats Pas Cher replique montres beats by dre pas cher montres rolex pas cher mulberry outlet mulberry sale